Electronic water treatment- automated devices

 

EUV 50 AI - EUV 1000 AI

Devices EUV 50 AI - EUV 1000 AI are designed to be used when the flow rate of the water fluctuates in a wide range irregularly. Built-in water meter supplemented by a sensor is checking the flow rate in regular intervals and automatically sets an optimal mode for current flow rate.

 

 

 

 

 

 

 

 

 

How to install the device:

Preparation of hot non-potable water for larger boiler rooms and heat exchanger stations

Data in brackets are valid for smaller pipe diameters and smaller flow rates

 

Basic technical parameters of EUV xx AI- type devices

Type	Flow rate [m3/hod]	Max. pipe diameter		Dimensions [mm]	Power [VA]
		inner [mm-inch]	outer [mm]
EUV 50 AI	0,2 - 11	50 (2 ")	60	275x220x140	8
EUV 65 AI	0,3 - 18	65 (2 1/2 ")	76	275x220x140	8
EUV 80 AI	0,5 - 27	80 (3 ")	89	275x220x140	8
EUV 100 AI	0,8 - 42	100 (4 ")	115	275x220x140	8
EUV 125 AI	1,4 - 66	125 (5 ")	140	275x220x140	10
EUV 150 AI	2,0 - 100	150 (6 ")	166	275x220x140	10
EUV 200 AI	3,2 - 170	200 (8 ")	219	275x220x140	10
EUV 250 AI	6,0 - 270	250 (10 ")	273	275x220x140	10
EUV 300 AI	8,0 - 380	300 (12 ")	324	275x220x140	10
EUV 400 AI	13,0 - 680	400 (16 ")	430	370x275x140	16
EUV 500 AI	24,0 - 1100	500 (20 ")	535	370x275x140	16

 

Installation of EUV xx AI- type devices

 

 

 

Built-in flow rate sensors for EUV xx AI

Basic technical parameters of the impulse flow rate sensors

Sensor IR – reflective light beam according to DIN 19234 Specification Supply voltage 8,2 V DC (from EUV xx AI)   Current while reflecting 1,2 mA   Current when not reflecting 2,1 mA Constant DN 40 - 125 1 impulse / litre   DN 150 - 300 1 impulse / 10 litres